Please see this known issue if you are taking a backup with XtraBackup with MySQL tables modified via INSTANT DDL
Backup and Restore are integrated features provided by tablets managed by Vitess. As well as using backups for data integrity, Vitess will also create and restore backups for provisioning new tablets in an existing shard.
This flag controls if the backups are compressed by the Vitess code.
By default it is set to true. Use
--backup_storage_compress=false to disable.
If --backup_storage_compress is true, backup_storage_block_size sets the block size in bytes to use while compressing (default is 250000).
If --backup_storage_compress is true, backup_storage_number_blocks sets the number of blocks that can be processed, in parallel, before the writer blocks, during compression. It should be equal to the number of CPUs available for compression. (default 2)
Select what is the compression level (from `1..9`) to be used with the builtin compressors.
It doesn't have any effect if you are using an external compressor. Defaults to
1 (fastest compression).
This indicates which compression engine to use. The default value is pargzip.
If using an external compressor (see below), this should be a compatible compression engine as the
value will be saved to the MANIFEST when creating the backup and can be used to decompress it.
Instead of compressing inside the vttablet process, use the external command to
compress the input. The compressed stream needs to be written to STDOUT.An example command to compress with an external compressor using the fastest mode and lowest CPU priority:--external-compressor "nice -n 19 pigz -1 -c"
If the backup is supported by one of the builtin engines, make sure to use --compression-engine-name
so it can be restored without requiring --external-decompressor to be defined.
Using the --external-compressor-extension flag will set the correct extension when
writing the file. Only used for the xtrabackupengine.
Example: --external-compressor-extension ".gz"
Use an external decompressor to process the backups. This overrides the builtin
decompressor which would be automatically select the best engine based on the MANIFEST information.
The decompressed stream needs to be written to STDOUT.An example of how to use an external decompressor:--external-decompressor "pigz -d -c"
For the file plugin, this identifies the root directory
for backups. This path must exist on shared storage to provide a global backup view for all vtctlds and vttablets.
For the gcs plugin, this identifies the
For the s3 plugin, this identifies the AWS region.
For the s3 plugin, this identifies the AWS S3
For the ceph plugin, this identifies the path to a text
file with a JSON object as configuration. The JSON object requires the
following keys: accessKey, secretKey,
endPoint and useSSL. Bucket name is computed
from keyspace name and shard name is separated for different
keyspaces / shards.
If set, perform a clean MySQL shutdown and startup cycle. Note this is not
executing any `FLUSH` statements. This enables users to work around xtrabackup
The flags to pass to the xbstream command during restore. These should be space separated and will be added to the end of the command. These need to match the ones used for backup e.g. --compress / --decompress, --encrypt / --decrypt
For the xtrabackup backup engine, directory location of the xtrabackup executable, e.g., `/usr/bin`
For the xtrabackup backup engine, flags to pass to the backup command. These should be space separated and will be added to the end of the command.
For the xtrabackup backup engine, which mode to use if streaming, valid values are tar and xbstream. Defaults to tar.
For the xtrabackup backup engine, required user that xtrabackup will use to connect to the database server. This user must have all necessary privileges. For details, please refer to xtrabackup documentation.
For the xtrabackup backup engine, if greater than 0, use data striping across this many destination files to parallelize data transfer and decompression.
For the xtrabackup backup engine, size in bytes of each block that gets sent to a given stripe before rotating to the next stripe. Defaults to 102400.
Flags to pass to the prepare command. These should be space separated and will be added to the end of the command.
Only VTTablet can be configured to restore from a previous backup. The flags below only apply to VTTablet.
Indicates that, when started with an empty MySQL instance, the
tablet should restore the most recent backup from the specified
storage plugin. This flag only applies to VTTablet.
If set, restore the latest backup taken at or before this timestamp
rather than using the most recent one. Example: ‘2021-04-29.133050’.
Note that for the Google Cloud Storage plugin, we currently only support
Application Default Credentials. This means that access to Google Cloud Storage (GCS) is automatically granted by virtue of the fact that you're already running within Google Compute Engine (GCE) or Google Kubernetes Engine (GKE).
For this to work, the GCE instances must have been created with the scope that grants read-write access to GCS. When using GKE, you can do this for all the instances it creates by adding --scopes storage-rw to the gcloud container clusters create command.
We recommend to take backups regularly -- e.g. you should set up a cron job for it.
To determine the proper frequency for creating backups, consider the amount of time that you keep replication logs (see the binlog_expire_logs variables) and allow enough time to investigate and fix problems in the event that a backup operation fails.
For example, suppose you typically keep four days of replication logs and you create daily backups. In that case, even if a backup fails, you have at least a couple of days from the time of the failure to investigate and fix the problem.
By default, vttablet backups are compressed using pargzip that generates gzip compatible files.
You can select other builtin engines that are supported, or choose to use an external process to do the
compression/decompression for you. There are some advantages of doing this, like being able to set the
scheduling priority or even to choose dedicated CPU cores to do the compression, things that are not possible when running inside the vttablet process.
The built-in supported engines are:
To change which compression engine to use, you can use the --compression-engine-name flag. The compression
engine will also be saved to the backup manifest, which is read during the decompression process to select
the right engine to decompress (so even if it gets changed, the vttablet will still be able to restore
If you want to use an external compressor/decompressor, you can do this by setting:
--external-compressor with the command that will actually compress the stream;
--external-compressor-extension (only if using xtrabackupengine): this will let you use the extension of the file saved
--compression-engine-name with the compatible engine that can decompress it. Use external if you are using an external engine not included in the above supported list. This value will be saved to the backup
MANIFEST; If it is not added (or engine is external), backups won't be able to restore unless you pass the parameter below:
--external-decompressor with the command used to decompress the files;
The vttablet process will launch the external process and pass the input stream via STDIN and expects
the process will write the compressed/decompressed stream to STDOUT.
If you are using an external compressor and want to move to a builtin engine:
If the engine is supported according to the list above, you just need to make sure your --compression-engine-name is correct and you can remove
the --external-compressor parameter
If you want to move away from an unsupported engine to a builtin one, then you have to:
First change the --compression-engine-name to a supported one and remove the --external-compressor
Once the first backup is completed, you can then remove --external-decompressor
After this all new backups will be done using the new engine. Restoring an older backup will still require the --external-decompressor flag to be provided